[V10BAT]

hi i have just finished installing a set of "fully adjustable" billit shocks with hyperco springs.i didnt know were to begin with ride hight settings,so i set them on the lowest setting.lock ring on the last thread,i thought i could then raise it up to 1/2 to 3/4 inch lower than my stock set up,only to find the car is aprox 1/2 higher than my stock numbers!and yes i have driven the car 20 miles or so ,in the hope it would settle. but it didnt.the car seems a lot smoother so i dont think the spring rate is to high.somethings not right. shorter springs perhapes?.no adjustment left!point is check out your shocks and springs to see if you have got any ride height adjustment.hope this helps.