[grayman]

Got a set of 19" HREs used. Were on a GTS, putting on an 04 SRT. Fronts fit fine. Rears have an interference with the ebrake. The rear rims are not straight flush on the inside but have a hump about 2 inches from the inner edge. Unlike the stock SRT rims, this "hump" is what is interfering with the ebake connection by only about a mm or so. Someone told me they had machined the bracket for the ebrake so there was no interference. On the stock rims, there is about a 1/4" of clearance but I dont think I can machine out that much material. Do I need to or will a mm or so of clearance be OK? I also heard there was an ebrake relocation kit?