Quote:
Originally Posted by mbccenter
Keith
I was just thinking. Did you find the problem you were having on the dyno? Maybe that has something to do with it?
|
No. Replaced the fuel filter though. I kept an eye on the AFR's and everything seemed fine. A tad on the rich side if anything.
Quote:
Originally Posted by Russ M
In a perfect world your hp should be enough for 140mph, practice makes perfect.
|
At a race weight of 3700 lbs???
Quote:
Originally Posted by RobZ
Our shop EVO with a built engine and GT37R turbo put down 625AWHP on our Mustang dyno and ran a 10.667 @ 132 down in 90* Tucson heat. I would expeect a higher trap speed with the torque of a boosted Viper.
Rob
|
Again, what about the weight. 100 lbs = ~1 mph.
Quote:
Originally Posted by mnviper
Just curious, are you running the same fuel as at Joe's or is our 10% ethanol Minnesota fuel now involved? I did a little research and found that the 10% mix has about 3% less BTUs than standard gasoline.
|
Same fuel as when it was on the dyno which was/is our local 92 octane pump gas.