[Bobpantax]

The Viper shown appears to be the same Viper that was at our VCA dyno day yesterday. It produced about 650 RWHP and about 640 foot pounds of torque. It has a stock Paxton kit on a stock engine with after market headers and exhaust. By comparison, my SRTC with a stock Paxton kit, stock headers and a Corsa cat back produced 653.93/598.16 at the rear wheels last February when the temp and humidity were 88 degree and 36%, respectively. Yesterday was in the low 70's. So you can see, this is not an apples to apples comparison.