Re: SRT Engineer Chat HERE on January 16th!
Couple questions that are somewhat technical, hopefully you guys can answer them. They are regarding the PCM programming in the SRT-10's. I understand if you cannot answer some/all of them.
All questions are based on 2006: 05030302AC
1. Can you break down what these binary controls do?
Knock Sensor Config Binary: 11000000
2. Is Adaptive Learning always disabled above 3584 RPM, or does it require both 3584 RPM AND being outside of the 98.85-787.76 TORR range?
3. Does the Viper PCM utilize a PrimeShot during Key-On, or is prime fuel only sprayed during cranking?
The inner workings of the JTEC Control System are proprietary... and we cannot give calibration guidance.
There is a key-on prime shot though...
Last edited by SRT Engineers; 01-16-2008 at 04:44 PM.
|