Re: Innovate LED / switch mounting
here's a couple pics of my setup inside the car
I think it is stealthy yet easy to use in the car and looks clean
this is on the panel under the steering column
the headlight switch is to the left of the button/LEDs and the fusebox is at the bottom of the panel
there is only 1 momentary button because I wired the black wires together after the LEDs
I figure there will never be a reason not to calibrate the sensors at the same time
the LEDs are separate to monitor the codes from each sensor
I see this as superior to mounting the LEDs in the engine bay because I will know if the sensor is sending a code while I'm driving
__________________
97GTS B&W: Roe S/C 5#, VEC3, Borla headers and catless exhaust, smooth tubes and K&Ns, 1.7 rockers, 3.55 gears, Fidanza, short-shift kit, 577rwhp/577rwtq all on cast pistons
|