[Nadine UK GTS]

Jack this has been on my mind a little all day!
I started doing some more measures, I had several OE slaves, and with the bearing on the spring, fully retracted, there was a defference of 0.182" between them all (!!!) the years were '94 - '99. But...I have sourced other bearings to replace on the slaves. Are you measuring off the long sleeve that slips over the input shaft?

What do you think the free play measure is on OE with spring retracted? Is the bearing spring is to be full compression? I've tried to measure this before, but rember it was tricky.

I found some old notes, I 'think' distance from trans machined HRB mount surface, to release fingers was 3.48" total, if I understood my notes OK!