GTS Dean
- Posts
- 3,790
- Reaction score
- 210
Latest activity Postings About
-
-
Good News: I can access the Balancer/Crank Nut Screw with ease while the Pulley is on. Has a Cut out. But nothing wrong there... -
GTS Dean replied to the thread Rattling and imbalance on the engine.You can access the crank damper bolt without removing g the pulley, but it's awkward. (6) 1/2" hex bolts and the pulley is off.
-
GTS Dean replied to the thread 96 dipstick indicator.I used a couple tie wraps that I could slide over the tee handle to keep it from pushing out quite as bad. I think the primary culprit...
-
GTS Dean replied to the thread 96 dipstick indicator.Before I did the screw-down cap mod on my GTS, it would push the dipstick out under high engine loads at the track quite regularly.
-
GTS Dean replied to the thread Viper Alum V10 New bare block.Very obviously a wet liner block - so Gen1. Also, no t-stat/CCV outlet behind timing case, so not Gen2.
-
can you be a little bit more specific? GTS/RT10? Are you talking about the vertical portion or the horizontal portion of the door...
-
Good news, car has been recovered undamaged. Thank you to all for your thoughts and well wishes. It’s been a hectic couple of days. Dann
-
GTS Dean replied to the thread Soft top, rear hinge repair.Nice work!
-
off market for minor repairs
-
GTS Dean replied to the thread 1998 gts wiring information.can you link a hosted photo? I'm having some trouble figuring it out by your description.
-
GTS Dean replied to the thread Gen1 1994 Viper Parking Brake Cables.This might help... https://www.viperclub.org/vca/threads/why-does-my-parking-brake-get-loose.678720/
-
GTS Dean replied to the thread European Rt/10 exhaust replacement.I actually bought a Euro exhaust system for my 93 that I was going to install, but ended up trading the car on my GTS. I studied the...
-
GTS Dean replied to the thread Plugs and wires.Now that you've earned your stripes - next time, put some silicone grease on a Q-tip, then apply inside the rubber boots before pressing...
-
GTS Dean replied to the thread Belanger Headers, Corsa, and Plug Wires.That came from Hennessey. It is really nice and makes HP at high speeds. No longer available.
-
GTS Dean replied to the thread Belanger Headers, Corsa, and Plug Wires.Very true Steve! Make sure your O2 wires run straight away from the sensor, then bend gently to keep them at a safe standoff distance.
-
-
Loading…
-
Loading…
