-
-
daveg replied to the thread Gen 3 - Crankshaft pulley bolt --add me to the list..I always tell people to Index the bolt to pully with white paint or reasonable facsimile there of.. Look at it frequently at first and... -
daveg replied to the thread 96-97 Window Switch.The DS1129 is a Standard part. I had to replace mine a few years ago and used the Standard DS1129. Also had to snap the cover off and on...
-
daveg replied to the thread Smog Time again.First thought for me was coil. To test Intake leak, spray small amount of starter fluid where intake meets head (up and down on both...
-
daveg replied to the thread Need Power Steering and Brake Fluid recommendations.In 1999 the rings were supposedly changed from paper lined to carbon fiber. Because of this I would run Dex III in anything less than...
-
daveg replied to the thread Need Power Steering and Brake Fluid recommendations.Only change I would make is in the Tranny, I run Castrol Transmax DEX/MERC (have a 96 GTS) Trans fluid, meets the Dextron III Standard...
-
daveg replied to the thread Bent Exhaust Valve - Again.For curiosity, I would send a Borescope in and take a look at the top of that piston. Obviously head needs to be remove and you can look...
-
-
Loading…
-
Loading…
