NE Dyno Day May 10th At Pro Tree Performance

[YELLOH]

Hi Everyone. Want to know what your car is putting out for HP here is your chance to find out. The NEVCA is having a Dyno Day on May 10th at Pro Tree Performance in Hudson NH. Dana Lombardozzi has invited us to his facility for a day of HP. He has offered to give us 3 pulls on his Dyno Jet for $50.00. You will recieve your air fuel ratio and RWHP and RWTQ. This is a good way to get a baseline before you do your modifications or to find out what your modifications you have done are producing now. Dana will be firing up the grill and cooking burgers and hot dogs. If you like to find out a little bit more about Pro Tree Performance, check out their website : www.protreeperformance.com . Their are a few NE members who have some impressive numbers. Come and spend the day with fellow Viper club members, sure to be a great afternoon. This event will start at 9:00 AM at Pro Tree Performance which is at 120 Ferry Street which is also Rte 111 in Hudson, NH . Just over the Mass state line. If you have any questions pertaining this event don't hesitate to email me at viper2004srt10@aol.com . So if you are interested in going let me know so I can give Dana a head count . Rick

[NukedGTS]

Originally Posted by YELLOH

Hi Everyone. Want to know what your car is putting out for HP here is your chance to find out. The NEVCA is having a Dyno Day on May 10th at Pro Tree Performance in Hudson NH. Dana Lombardozzi has invited us to his facility for a day of HP. He has offered to give us 3 pulls on his Dyno Jet for $50.00. You will recieve your air fuel ratio and RWHP and RWTQ. This is a good way to get a baseline before you do your modifications or to find out what your modifications you have done are producing now. Dana will be firing up the grill and cooking burgers and hot dogs. If you like to find out a little bit more about Pro Tree Performance, check out their website : Home . Their are a few NE members who have some impressive numbers. Come and spend the day with fellow Viper club members, sure to be a great afternoon. This event will start at 9:00 AM at Pro Tree Performance which is at 120 Ferry Street which is also Rte 111 in Hudson, NH . Just over the Mass state line. If you have any questions pertaining this event don't hesitate to email me at viper2004srt10@aol.com . So if you are interested in going let me know so I can give Dana a head count . Rick

Rick, I think I can squeeze the 20 minute trip into my busy schedule. I will PM you.

[Viperguynick]

I'm There! Think he will be able to squeeze in the Trans Am too?

Nick

[YELLOH]

Hi Nick
Anything for you. Don't forget the camera. Sounds like 3 so far.

[cobraman484]

I'll be there too. This time with the viper.

Peter

[YELLOH]

Your the man Peter. Should be a great day.

[NukedGTS]

Rick, What's the headcount up to?

[YELLOH]

Hi Mike
This is the list I have for Dyno Day May 10th
1. Rick
2.Tim
3.Nick
4. Peter
5. Mike
6. Roger
List will get longer as day approachs, good so far.

[NukedGTS]

Originally Posted by YELLOH

Hi Mike
This is the list I have for Dyno Day May 10th
1. Rick
2.Tim
3.Nick
4. Peter
5. Mike
6. Roger
List will get longer as day approachs, good so far.

Nice. If I hear anyone laughing at the numbers from my lowly stock 97, I swear I'll leave after the first pull!!

[ELW98]

I will likely make it too. (weather permitting)

Ernie

[davem]

Guys,
I'm going to try and make it too, not 100% sure yet.

best,
Dave.

[YELLOH]

Hi Dave
It's been a while since we seen you. I hope everything is going well with you and your wife. Hope to see you at Dyno Day, I need more boost out of my Viper.
1. Rick
2. Tim
3. Nick
4. Peter
5. Mike
6. Roger
7. Ernie
8. Dave M ?

[FLX109]

Originally Posted by YELLOH

Hi Dave
It's been a while since we seen you. I hope everything is going well with you and your wife. Hope to see you at Dyno Day, I need more boost out of my Viper.
1. Rick
2. Tim
3. Nick
4. Peter
5. Mike
6. Roger
7. Ernie
8. Dave M ?

Rick,
You just boosted the body and thats specially fast, but are you really fast?? Or should I ask are you Dynoing fast?
And are you to wide to fit on the dyno now?

Bill

[YELLOH]

Hi Bill
The car is only 2" wider. I don't think that there is walls on the side of the Dyno, all the Dyno's are open. I'll find out Saturday. I did the body but ran out of money for the motor. I did order and recieved a programable flash card from ROE , I'll see what extra HP I get out of the car. How's your arm, can you shift yet. Are you coming this Saturday, I would like to see what a Viper is supose to have under the hood. For people who are new to the club, Bill's ride is Sweet.

A Note: I posted that Pro Tree Performance was right over the Mass Line. Should state just over the New Hampshire line.

[FLX109]

Originally Posted by YELLOH

Hi Bill
The car is only 2" wider. I don't think that there is walls on the side of the Dyno, all the Dyno's are open. I'll find out Saturday. I did the body but ran out of money for the motor. I did order and recieved a programable flash card from ROE , I'll see what extra HP I get out of the car. How's your arm, can you shift yet. Are you coming this Saturday, I would like to see what a Viper is supose to have under the hood. For people who are new to the club, Bill's ride is Sweet.

A Note: I posted that Pro Tree Performance was right over the Mass Line. Should state just over the New Hampshire line.

Ran out of money? C'mon Rick your wife told me you have plenty of money, they call you deep pockets I here.
Don't know if I will be there unless I am driving my automatic truck, love to see you car though looks awsome.
I have a couple more weeks of therapy but coming along great and I sure would hate to miss a gear if I attempted to get there in the Viper, of course it was the right wrist too, last time I checked and had a tune I think I was around 765 HP or 666 RWHP .
Hope to see you guys soon
Bill