Programmers and calibrations

[DC Performance]

I just wanted to let everyone know again that DC Performance is offering Computer Calibrations and Hand Held Programmers for Vipers and Viper Truck. 1992-1995 Vipers calibrations can only be done in house (you send us your computer). We can build a calibration for almost any engine specific setup.

We can program your controller, provide you with a new re-programmed controller or send you a programmer that allows you to do it yourself.

For those of you who currently have SCT programmers, we can e-mail you calibrations too load.

I know there are many tuners now on the Market. I think what sets DC Performance apart is our reputation as pioneers in the Viper tuning market. We have been doing this in house for over 5 years. We provide customer service and Tech support for all we do.

Dan Cragin
DC Performance Inc
310-841-6996

[JiPi]

Dan,
What about 96 RTs?
Are they SCT compatible?

[vprtech]

Originally Posted by JiPi

Dan,
What about 96 RTs?
Are they SCT compatible?

Yes they are.

- Chris

DC Performance: Proven Performance

[Racer Robbie]

Originally Posted by DC Performance

I know there are many tuners now on the Market. I think what sets DC Performance apart is our reputation as pioneers in the Viper tuning market. We have been doing this in house for over 5 years. We provide customer service and Tech support for all we do.

Dan Cragin
DC Performance Inc
310-841-6996

Guys, I have to tell you that Dan along with Chuck Tator provide the best customer support after the sale that I have ever experienced. They are the best!

[Racer Robbie]

Dan, what are you doing in regards to a programmer for people who previously bought your ECM Tune on their existing or new ECM? Do you offer an upgrade?

[CROM]

I think one of the vendors needs to do a nice writeup of this device with real results, clear explanations of use, what it does, dyno sheets, etc.. There are surely many people on the fence for the SCT Calibrator. It may go on my Christmas list this year, but I need to know that it's actually worth doing. I never plan on going FI, but may do RRs and Headers down the road. If the car runs better, smoother and I get a little extra juice, then I can see doing it.

[Tim]

Originally Posted by CROM

I think one of the vendors needs to do a nice writeup of this device with real results, clear explanations of use, what it does, dyno sheets, etc.. There are surely many people on the fence for the SCT Calibrator. It may go on my Christmas list this year, but I need to know that it's actually worth doing. I never plan on going FI, but may do RRs and Headers down the road. If the car runs better, smoother and I get a little extra juice, then I can see doing it.

I agree, more information needed

[DC Performance]

I will prepare a write up about the SCT programmers with all the information you have requested.

Dan Cragin
DC Performance Inc.

[ViperTony]

Dan...would you mind comparing the SCT to the Vec2/3? i.e. what can the Vec do that the SCT can't do and vice-versa. Thanks! - Tony

[whitebluevipe]

i think a write up is a great idea.

[Racer Robbie]

Thank you Dan.

[pickeralbc]

Dan, what numbers could I expect on my 94 with headers, smooth tubes, high flow cats and exhaust if I were to get my computer programed?

Thanks,
Bryan

[C.Thomson]

I purchased on of these for my 2006 Coupe with a bolt-on Paxton. The Paxton is the ONLY mod.

I was never happy with the car since the fuel curve was real fat at higher RPM's (Just when you need it!). Since I plugged and played, this car is like a totally different beast. No more lag and it does not lay down at all until you do 3 or 4 good runs at full power and it gets hot. Lower RPM's are a dream. This thing now runs like it should.

I would highly recommend this for all Paxton cars and I was not paid for this endorsement.

[CROM]

Originally Posted by DC Performance

I will prepare a write up about the SCT programmers with all the information you have requested.

Dan Cragin
DC Performance Inc.

Any action taken on this? I'd pull the trigger if you convinced me to.

[PowerKraus]

Originally Posted by DC Performance

<<I know there are many tuners now on the Market. I think what sets DC Performance apart is our reputation as pioneers in the Viper tuning market. We have been doing this in house for over 5 years. We provide customer service and Tech support for all we do.

Dan Cragin
DC Performance Inc
310-841-6996

>>

Does the current SCT programmer have 'PC based' software where-in the owner can program several parameters; simliar to something like HP Tuners or EFI Live (GM tuner software). Or is the owner programmable features primarily accessable via 'yes/no/preset ranges' type questions on the SCT programmer LED screen?

Specifically, can the owner custom program timing based, say rpm & load, along with programming fueling, commanded air fuel ratio, idle rpm, redline, fan on/off, STFT/LTFT, etc....plus viewing & logging options.

I appreciate your feedback.....I am SO looking forward to a true owner/user tuning option beyond the VEC or PCM R&R flashing.

Thanks !

Rob
2002 GTS