Belanger headers and B&B catless catback

[Cal Cobra]

Hi,

A friend and I are going to be installing a set of Belanger headers and this B&B catless exhaust from Roe Racing on my 96RT/10 this weekend:

http://roeracing.com/ProductCart/pc/...p;idproduct=15

I was told that the factory exhaust manifold bolts and factory header gaskets will work fine with this (the headers didn't come with them). Can someone confirm if this is the case?

Seems like the installation should be pretty straight forward, but are there any helpful tips or gatch-yas about the installation?

Thanks,
Cal

[SingleMalt]

Stock bolts should work fine. I used a new set of factory gaskets with the header install w/o probs.

I'll tell you about a little gotcha I had with B&Bs on a 1996 RT/10 -- on the passenger side, the second pipe from the firewall I believe needed to be ovaled to clear the frame rail. Not a big deal, but it was a bit of a setback.

Good luck and take your time.

Mike