The Ultimate Wheel Thread !

[ghayes420]

I think you need to lift some weights Daddy Long Snake.

;]

[JUCD VPR]

My 99' RT/10
18" CCW 505 wheels

[Trbulnc]

CCW 505A's 19" all around. Pirelli P0's.

Those look great, I am really thinking of a set. Did you lower your car or is that where the ride height sits?

[Prinzipal]

Hello,

ST MonoStar 20"




Greets

[Tommy K]

Looking to TRADE these WP6 5 spokes for stock 10 spokes plus cash:

http://www4.forum.viperclub.org/show...e=0#Post762327

[OKViper]

Gen III wheels on a 99 GTS...

[HARDVIPER]

ACR BBS wheels, 18" front and back. Chrome plated.

These are my personal favorites on a GTS.

Nothing better than chromed ACR wheels

[SYNFULL]

Here's my new I-Forged with P-Zero's.

[GTSNRT10]

20X13 REAR & 20X10 FRONT W/ 345/25/20 R 285/35/20 F PIRELLI ROSSO's
IFORGED wheels on both cars
GRAPHITE CAR =ANTHRACITE ASTRAS W/ CHROME LIP
SILVER CAR= FULL POLISH DAYTONAs

[-FROG-]

GTS wheels on my 94' with Pilots, stock height.





Since I'm on a budget but wanted aftermarket wheels, I did some looking around
for something that wouldn't break my bank but give my car a more "tuned"
look. Good ol' Tire Rack.com came in handy. Price/sizes all totaled up below.
With the new rubber, my car HOOKS on the street! See the new pics below with a
few cosmetic mods and lowered with Eibach Pro Kit. Even though the wheels are
17", when measured from lip to lip, they were 18.5" wide. My 17" wheels on my
Mustang GT only measure 18" wide, so these may have a little bigger lip making
them look just a tad bigger. Looks pretty proportional to me, so I got what I
was wanting. The pics at the very bottom are a little cheesy, but a few peeps
asked what it would look like with a painted rim/silver lip, so I did my best
to show an idea of what it would look like if someone wanted to have their
SSR's painted. There's a nicely defined line on the lip to have the silver
taped off and only get the spokes painted if desired.

2 P275/40ZR-17 Sumitomo HTR Z In Stock $88.00 $176.00
1 Sumitomo Registration Card In Stock N/C N/C
1 Sumitomo Warranty Packet In Stock N/C N/C
2 17x11 SSR Comp-H SML In Stock $459.00 $918.00
24 Required lugnut for vehicle In Stock N/C N/C
2 SSR center cap In Stock N/C N/C
2 17x13 SSR Comp-H SML In Stock $509.00 $1,018.00
12 Required lugnut for vehicle In Stock N/C N/C
2 SSR center cap In Stock N/C N/C
2 335/35WR-17 Kumho ECSTA V700 In Stock $208.00 $416.00
1 Kumho Registration Card In Stock N/C N/C
2 Mount and Balance (No Charge) N/C N/C
2 Mount and Balance (No Charge) N/C N/C

Shipping: $104.62
Tax: $.00
Excise Tax: $.00
State Waste Tire Fund Fee: $.00
Order Total Including Shipping: $2,632.62

[grcforce327]

[ViperJames]

[02 Graphite GTS]

I went with CCW 505A's 18x10 fronts with Pirelli P0 275/35/18
19x13 rears with Pirelli P0 355/25/19
I had CCW ship the wheels to Cal Chrome for an awesome chrome job.
Luke at TireRack shipped my tires to Cal Chrome so they could do the mounting and balancing for me.









I bought blank center caps from CCW and then engraved the Sneaky Pete logo on them with my CNC router.

[AJT]

Those look nice, I especially like the custom caps.
Smart move have the chromer mount the tires.

How well do the Pirelli's hook up?

How wide is that lip?
If you dont mind saying how much for the whole package to your door?

Thanks
Andy

[RoadiJeff]

The chrome CCW505A's look nice but I really cannot tell the difference between the finish on them and Cayman's factory polished CCW505 wheels on the previous page. Unless chroming is a more lasting finish and protection I don't think I would be inclined to spend the extra money to have it done.

I'm considering a set of these later this year so I carefully study any pics of these particular wheels.

[syclone1157]

H

[dyeguy]

I can tell a big difference between the polished and chrome finish. I have 2 sets of CCW wheels right now one polished and the other chrome. When you look at them side by side there is a huge difference. Also, the chrome is definitely easier to keep clean. I'll post some pics of them side by side later.

[MacManInfi]

18" SSR's

[00SVTdubs]

lets take this back to the top!

[NOTV8]

Anyone with SP600 on a GTS?

[InjectTheVenom]

That looks SICK right there

http://i14.tinypic.com/4dwum95.jpg

Also really liking this picture, though I prefer the looks of the Mopar hardtop myself even though it's big and can't be stored in the trunk

http://i14.tinypic.com/4dwum95.jpg

[InjectTheVenom]

How about this combo:

http://cgi.ebay.com/ebaymotors/Dodge-Vip...100421363QQrdZ1

[00SVTdubs]

Anyone with SP600 on a GTS?

i posted some on this thread.. its SW's red car

[Zed Sump]

still can't find the perfect wheel design for the future RT....!
closest so far is the HRE 893r:
http://www.hrewheels.com/wheels.php?q=/890R/890R/

F19"x275,
R19"x345,
no rim studs,
recessed rears,
black inner and silver rim options...

but they're too expensive even on OEM trade in! could anyone please post a pic if they have this set up?
is there a similar, less expensive design out there?
cheers
pete

close (without rim studs):



what are these? concentrate on the wheels!:


(c/o Albert Fattal)

[Zed Sump]

(if anyone here notices their viper in these photos and wants it removed, pse let me know - apologies in advance!)

more 'almost perfects':


other 'look enhancing' designs?:

[Zed Sump]

http://elusivefx.com/Gallery/Viper

[plumcrazy]

great link with pics...thanx

[Zed Sump]

Originally Posted by plumcrazy

great link with pics...thanx

happy to help! just need more pics with ideas - might have just 6 wks now before i get over for the big viper buy

[ThePharaoh]

HRE 547R fully chromed 20" all the way around...

[Zed Sump]