|
|
|
| Forums | Media Gallery | Classifieds | Chat | Membership | Marketplace | How-Tos |
| |||||||
| Register | All Albums | Blogs | FAQ | Members List | Search | Today's Posts | Mark Forums Read |
| SRT10 and SRT10 Coupe Discussions (2003 and Up) For technical and general questions and discussions related to the "GEN III-IV" SRT-10 convertible and Coupe Vipers (2003+). Sponsored by: Woodhouse Dodge |
![]() |
|
|
#1 |
|
Hello, I just received my 2008. (I upgraded from a viper red 2006 conv. with 10-spoke wheels).
Unfortunately the craftsmanship of my convertible top assembly leaves a lot to be desired. My 2006 was "perfect", but my 2008 shows a few cosmetic flaws. It's probably best to let the pictures speak for themselves, but for those who don't see the problems: -Driver side has 3 bolt (or rivet?) heads showing through the canvas and one sharp edge showing through the canvas 4" above the 3 bolts. Neither the bolts or edge show through on the passenger side. -The canvas near the windshield of the passenger side is not fully streched out and is weavy (bulges). Am I just being way too picky? I would expect a 90.4k car not to have defects that show on 10' distance. (When you know the defects, they show even from "far" away as you can se in the whole car picture.) Comments please! ![]() ![]() ![]() Peter |
|
|
|
|
|
|
#2 |
|
Well the good news is that it does function properly....However, if you are not happy then i would go to the dealer and demand a whole new top....Problem is when u go to the dealer they might try to push and bend the top to fix it......mine did not latch properly so i made the mistake of taking it to my local dealer who basically just bent the top so it latches ok but it still comes down on the door and i don't think the dealer ever appreciated how hard it was to latch in the first place......it has also malformed some of the rubber on the door...my dealer doesn't see the big deal but i think the whole top needs replacing and the rubber on the door replacing... i can live without the paint that has been rubbed off..
Woodhouse is gonna take a look at mine ALSO another issue on mine was the rubber stripping around the windshield on the outside of the car was just not installed correctly on the passenger side... the dealer is going to have a glass company replace that....I also had the computer shutdown which was fixed (flashed)...Otherwise i am delighted with the car BUT the soft top issue has been the most depressing for me..... I also feel like you about worrying that i am being to picky but i think we both deserve these problems fixed with at least new tops Last edited by wallbanger; 05-25-2008 at 09:50 AM. |
|
|
|
|
|
|
#3 |
|
Yeah, mine also has the problem that it comes down on the passenger rear quarter panel and & door, but I was fortunate to discover it right away before it did any damage to the paint. From what I've seen so far it's more of an annoyance than a problem. I just need to remember to stand on the passenger side when rasing the top and make sure that the edge falls into the groove and doesn't stay on the top of the side/door...
I could not live with paint rubbed off.. That would drive me insane ![]() Do you have any of the cosmetic issues that are bugging me (visible bolt heads, weavy canvas)? I'm definitely going to have them take a few pictures of the top for warranty purposes... Peter Last edited by Peter Nielsen; 05-25-2008 at 11:18 AM. |
|
|
|
|
|
|
#4 |
|
IT IS very interesting since i posted this issue with the top coming down on the drivers side door that at least 3 other people have come forward with the same issue
otherwise i have no cosmetic issues with my top good luck and beautiful car...and u must be single with a clean garage like that |
|
|
|
|
|
|
#5 |
|
|
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| My 2008 GTS Blue Convertible Arrived at the Dealer Today . . . | rcl4668 | SRT10 and SRT10 Coupe Discussions | 33 | 02-02-2009 10:51 AM |
| Comparison: 2008 Viper Convertible with and without Belanger Exhaust System | rcl4668 | SRT10 and SRT10 Coupe Discussions | 19 | 06-23-2008 07:38 AM |
| 2008 "Interior Issues" for SAT-NAV, Seat Lowering, Harnesses. | JonB - PartsRack | SRT10 and SRT10 Coupe Discussions | 0 | 01-25-2008 09:43 AM |
| Random - 1st pictures of the Copperhead Coupe in 2008 | MuscleJunkie | SRT10 and SRT10 Coupe Discussions | 14 | 01-08-2008 10:29 AM |
| first pictures of the 2008 interior colors | 06blackviper | SRT10 and SRT10 Coupe Discussions | 19 | 07-02-2007 07:35 PM |