Instrument Panel Bezel removal question.

Ulysses

Enthusiast
Joined
Oct 2, 2000
Posts
3,414
Reaction score
1
Location
San Diego, CA. USA
Once you remove the center panel bezel, headlamp switch knob, steering column covers and knee bolsters, is it just two bolts (one on drivers side one on passenger side) then lift off or is it more difficult than that?

Thanks
 

Matt M PA

Enthusiast
Joined
Oct 2, 2000
Posts
1,582
Reaction score
0
Location
Langhorne, PA USA
I haven;t pulled the instrument panel on my 2000, but did so on my '94 & '96. i seem to remember that there are screws, probably 6 of them, that held that in. Some were behind the knee bolster if memory serves me. I'll look in the service book when I get home. Also, I would bet that the retaining ring for the mirror adjuster would aso have to be removed. Oh yeah..no doubt several clips that are on the panel need to be "popped" off the metal dash itself.
 
OP
OP
U

Ulysses

Enthusiast
Joined
Oct 2, 2000
Posts
3,414
Reaction score
1
Location
San Diego, CA. USA
Matt, thanks. Seems pretty straight forward. I checked my manual and couldn't find a section dedicated to removing the bezel. If you find it, let me know.
 
Top