I thought is was the GREEN wire to be grounded...got a copy of Andy Levitt's post from Nov 2000(he's Va/Md Pres) noting you need to resync fobs;
1) remove left knee panel
2) locate dark green wire near right side of steering column
3) turn ignition to "on" position
4) connect green wire to ground
5) press buutton(S) on transmitter(fob) to set code(if there is a second transmitter, it has to be set at this time)
6) disconnect green wire from ground
7) install left knee panel
Good luck !!
1) remove left knee panel
2) locate dark green wire near right side of steering column
3) turn ignition to "on" position
4) connect green wire to ground
5) press buutton(S) on transmitter(fob) to set code(if there is a second transmitter, it has to be set at this time)
6) disconnect green wire from ground
7) install left knee panel
Good luck !!