18" Forgeline VR1 Help /Photos

[ACRGTS]

18\" Forgeline VR1 Help /Photos

I recieved mu Polished VR1's I installed only the wheels to take a look. They have a different offset. Does anyone have a photo down the side of a car with these wheels? I don't want it to look like a low rider import

 

[Fiorano]

Re: 18\" Forgeline VR1 Help /Photos

I have the forgeline VR1 19s. The offset is different and the side of the wheels is flush with the fenders. It looks better than the stock setup. I figure the offset for the rears is the same for both 19s and 18s as they are both 13 inches wide. I'm not sure about the fronts. I have 19x10s and yours are 18x11s.

 

[ACRGTS]

Re: 18\" Forgeline VR1 Help /Photos

Thanks for the reply. If you have any photos please send them to

[email protected]


Thanks

P.S. How do you like the 3"Corsa exhaust. Any resonance?

 

[ACRGTS]

Re: 18\" Forgeline VR1 Help /Photos

One more thing. How is the polishing on yours.. I have some milky sections under the clear. Does yours?

 

[Fiorano]

Re: 18\" Forgeline VR1 Help /Photos

I like the Corsa exhaust. No significant drone.

I have the nonpolished VR1s. The lip is polished, but the spokes aren't.

 

[ACRGTS]

Re: 18\" Forgeline VR1 Help /Photos

I think the Corsa exhaust is next for me.

 

[GCHDEALER]

Re: 18\" Forgeline VR1 Help /Photos

One more thing. How is the polishing on yours.. I have some milky sections under the clear. Does yours?

The polished ones have no clear coat on them. Aluminum Polish with get rid of the Milky (waterspots). I will post pics of my 19" VR1's
Chad

 

[GCHDEALER]

Re: 18\" Forgeline VR1 Help /Photos

Here are the pics but in 19's

These pictures were taken before the cars was lowered 1" To get rid of the ugly wheel/fender gap
Chad