Thread: License Plate Frame

Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 30 of 33
  1. #1

    Default License Plate Frame

    Has anyone figured out where to buy a License plate frame for the SRT? I bought one and it doesnt fit....it's almost like the space is flush against the edges of the plate...

    any ideas would be appreciated...

    Thanks!

  2. #2
    Viper Owner
    Join Date
    May 2005
    Location
    New York
    Posts
    3,384

  3. #3
    Enthusiast

    Join Date
    May 2003
    Location
    Southern CA
    Posts
    286

    Default Re: License Plate Frame

    Simple works best for me. I bought a dozen of those cheap plastic frames for $1 each from Pep Boys online. I use rubber plumbing washers to space the plate out from the car a little and mount it all with black hex bolts. Looks clean.(not the car, its dirty)


  4. #4
    Viper Owner
    Join Date
    Feb 2004
    Location
    Salt Lake City
    Posts
    1,562

    Default Re: License Plate Frame

    I have the MGW black anodized frame, and like it a lot.

  5. #5
    Viper Owner
    Join Date
    Nov 2005
    Location
    Dyker Heights, Brooklyn
    Posts
    227

    Default Re: License Plate Frame

    MGW has a crome one very nice.

  6. #6
    Viper Owner
    Join Date
    May 2005
    Location
    New York
    Posts
    3,384

    Default Re: License Plate Frame

    I have the chrome. As with their other products, very impressive.

  7. #7
    Viper Owner
    Join Date
    Jun 2006
    Location
    Castro Valley, Bay Area, California
    Posts
    59

    Default Re: License Plate Frame

    I would not use a license frame if i was you, i would just put the plate without a frame but make sure to put a rubber washer on every hole all 4 corners on the back of the license plate to avoid any scraches, if you use a frame you will eventually get scraches

  8. #8
    Viper Owner
    Join Date
    May 2005
    Location
    New York
    Posts
    3,384

    Default Re: License Plate Frame

    The MGW frame is at least 3/8 thick and bolts to the trunk lide in the four corners. No way it could even move let alone scratch the car.

  9. #9

    Default Re: License Plate Frame

    since you always need a plate...last thing I am worried about is scratches behind it...

    what did annoy me is to realize that the boot scratches the car because brilliant dodge uses HARD plastic that is rough on the bottom to touch the car....the boot shifts just a little when driving and opening/closing trunk...sure enough 4 tiny scratches at each corner.....you wonder where the common sense goes sometimes

  10. #10
    Viper Owner
    Join Date
    May 2005
    Location
    New York
    Posts
    3,384

    Default Re: License Plate Frame

    What boot? the convertible cover?

  11. #11
    Enthusiast

    Join Date
    May 2002
    Location
    Toronto, Canada
    Posts
    641

    Default Re: License Plate Frame

    I have the MGW black anodized frame, and like it a lot.




    What is wired on to the bottom of the frame?

  12. #12
    Viper Owner
    Join Date
    May 2006
    Location
    Longwood, FL
    Posts
    32

    Default Re: License Plate Frame

    The plates from MGW look great

  13. #13
    Viper Owner
    Join Date
    May 2006
    Location
    Longwood, FL
    Posts
    32

    Default Re: License Plate Frame

    How do you put pictures in your posts?

  14. #14
    Viper Owner
    Join Date
    Feb 2004
    Location
    Salt Lake City
    Posts
    1,562

    Default Re: License Plate Frame

    I have the MGW black anodized frame, and like it a lot.




    What is wired on to the bottom of the frame?

    Escort SRX laser jammer.

  15. #15
    Viper Owner
    Join Date
    Aug 2003
    Location
    Las Vegas NV
    Posts
    798

    Default Re: License Plate Frame

    I've got a chrome MGW plate frame with the locking screw things, minus the tool for removal. $50 shipped if anyone wants it.

    $75 if Venom wants it.

  16. #16
    Viper Owner
    Join Date
    Sep 2003
    Location
    AZ
    Posts
    219

    Default Re: License Plate Frame

    I've got a chrome MGW plate frame with the locking screw things, minus the tool for removal. $50 shipped if anyone wants it.

    $75 if Venom wants it.

    I will take it. But how do I get it on & off if I don't have the tool for those weird screws??

  17. #17
    Enthusiast

    Join Date
    Jan 2006
    Location
    Florida
    Posts
    810

    Default Re: License Plate Frame

    I dunno, that MGW looks way to cheap and just not clean enough for the Viper. I much prefer a sold black or chrome frame with covers for the screws.

  18. #18
    Viper Owner
    Join Date
    Jun 2003
    Location
    Michigan
    Posts
    270

    Default Re: License Plate Frame

    Here's the MGW chrome one...



  19. #19
    Enthusiast

    Join Date
    Feb 2005
    Location
    Gulfport, MS
    Posts
    1,214

    Default Re: License Plate Frame

    "How do you put pictures in your posts? Snk Btn "

    Click here

    BTW, MGW

  20. #20
    Viper Owner
    Join Date
    Nov 2004
    Location
    Long Island
    Posts
    5,908

    Default Re: License Plate Frame

    I dunno, that MGW looks way to cheap and just not clean enough for the Viper. I much prefer a sold black or chrome frame with covers for the screws.
    The last thing any MGW product would be is cheaply made, they are solid billet aluminum and beautiful. Best products on the market in their Viper stuff.

  21. #21
    Enthusiast

    Join Date
    Jan 2006
    Location
    Florida
    Posts
    810

    Default Re: License Plate Frame

    I dunno, that MGW looks way to cheap and just not clean enough for the Viper. I much prefer a sold black or chrome frame with covers for the screws.
    The last thing any MGW product would be is cheaply made, they are solid billet aluminum and beautiful. Best products on the market in their Viper stuff.
    No doubt about that, they may be bulletproof. But they look like they are homemade and un finished.

  22. #22

  23. #23
    Viper Owner
    Join Date
    May 2005
    Location
    New York
    Posts
    3,384

    Default Re: License Plate Frame

    Homemade and unfinished? You have never seen one in person. That couldnt be further from the truth.

  24. #24
    Enthusiast

    Join Date
    Jan 2006
    Location
    Florida
    Posts
    810

    Default Re: License Plate Frame

    Homemade and unfinished? You have never seen one in person. That couldnt be further from the truth.
    Indeed i have. Seem them many times actually. Few cars at DLM and some cars at Viper meets. It seems most folks have them since there are not really any other Viper Licence plate frames. I wish they would make a nice frame like Mercedes or BMW sell that look very clean with nice covers for all the screws.

  25. #25
    Viper Owner
    Join Date
    Apr 2005
    Location
    Ft. Lauderdale, Florida
    Posts
    3,091

    Default Re: License Plate Frame

    MGW frames, I have one as well, none better.

  26. #26
    Viper Owner
    Join Date
    May 2005
    Location
    New York
    Posts
    3,384

    Default Re: License Plate Frame

    Who needs screw covers when you can purchase nice looking stainless steel fasteners from MGW that require a special screw driver tip to remove the plate.

    The frame must be miled from a black of metal. It is extrmely high quality and the finish is amazing. You have to see it in person to appreciate.

  27. #27
    Viper Owner
    Join Date
    May 2006
    Location
    Wilmington, NC
    Posts
    219

    Default Re: License Plate Frame

    Who needs screw covers when you can purchase nice looking stainless steel fasteners from MGW that require a special screw driver tip to remove the plate.
    $15 for 4 fasteners that don't even come in black or chrome...

    They really should come standard with the frame and have a finish that matches.

    FWIW, for those that need a security bit: Do a search for "security bit set" on eBay. You can find 100pcs sets for $7.99 that contains all the bits you ever need.

    Peter


  28. #28
    Viper Owner
    Join Date
    Aug 2003
    Location
    Las Vegas NV
    Posts
    798

    Default Re: License Plate Frame

    Jim-Your frame is on its way.


  29. #29
    Viper Owner
    Join Date
    Jul 2004
    Location
    British Columbia, Canada
    Posts
    2,705

    Default Re: License Plate Frame

    go frameless it looks best

  30. #30
    Viper Owner
    Join Date
    May 2001
    Location
    Alb. NM
    Posts
    1,108

    Default Re: License Plate Frame

    That yellow black stripe srt coup looks awesome!! Please post pics.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. rear license plate frame
    By Blue Pilot in forum RT/10 and GTS Discussions
    Replies: 0
    Last Post: 10-06-2003, 04:38 PM
  2. Help! License Plate Frame
    By LotsaHP in forum RT/10 and GTS Discussions
    Replies: 11
    Last Post: 06-10-2003, 06:41 AM
  3. License plate frame
    By Jeff Torrey in forum RT/10 and GTS Discussions
    Replies: 3
    Last Post: 03-20-2003, 06:20 PM
  4. Funny license plate frame
    By Bob K in forum Sneaky Pete's Place
    Replies: 2
    Last Post: 05-03-2002, 11:18 PM
  5. Photo of my new MGW license plate frame
    By Foowowee in forum RT/10 and GTS Discussions
    Replies: 0
    Last Post: 04-02-2002, 12:37 AM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts