Fuel Pump Module Removal

Shelby3

Enthusiast
Joined
May 14, 2002
Posts
1,869
Reaction score
0
Location
liu;g
Anyone know how the large black vent hose comes off the fuel pump module in a GTS so the entire module can be lifted from the tank? Thanks
 

Qualitywires.com

Supporting Vendor
Supporting Vendor
Joined
Oct 18, 2000
Posts
7,050
Reaction score
0
Location
Louisville, KY
I used a pair of channel locks with tape wrapped around the jaws to protect the black hose. I used the channel locks to gently wiggle the hose loose.
 
OP
OP
S

Shelby3

Enthusiast
Joined
May 14, 2002
Posts
1,869
Reaction score
0
Location
liu;g
That was a ****** to get off. I have the pump module out and opened top to bottom. However the ring that holds the pump in the assembly will not pull up to allow removal of the pump. It is hanging up where the two sensor wires are routed. Looks like there is some kind of catch in there requiring a special tool to release it.
 
OP
OP
S

Shelby3

Enthusiast
Joined
May 14, 2002
Posts
1,869
Reaction score
0
Location
liu;g
The area in the red circle is where it's hung up. I don't see where breaking it would allow me to resecure it with a clamp.

You must be registered for see images
 
Top