Thread: Sourcing Obsolete Parts For Gen I and Gen II Vipers

Reply to Thread
Page 3 of 6 FirstFirst 1 2 3 4 5 ... LastLast
Results 61 to 90 of 180
  1. #61
    Viper Owner
    Join Date
    Nov 2006
    Location
    West Chester, Pennsylvania
    Age
    32
    Posts
    117

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    I am looking for the passenger side fog light cover for a 1994 dodge viper.

  2. #62
    Enthusiast

    Join Date
    Aug 2000
    Location
    Vancouver, WA
    Posts
    2,432

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    Dodge still has them in stock. Cal Chuck Tator @ Tator Dodge and he'll treat you right.

    Quote Originally Posted by vipertom7 View Post
    I am looking for the passenger side fog light cover for a 1994 dodge viper.

  3. #63
    Viper Owner
    Join Date
    May 2004
    Location
    Brighton, MI USA
    Posts
    137

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    For new Shop Manuals try this:

    http://www.techauthority.daimlerchrysler.com/

    I bought the full set for my 01 last year.

    Quote Originally Posted by yellow02 View Post
    i am looking for these parts for a 2002 GTS.

    -3 a/c Vents
    -Circle Plug on back side of fascia to access fogs.
    -Set of Lug nuts
    -Rubber wire cover for driverside door, where the wires go from the cabin to door.
    -shop manual.

    ....anyone?

  4. #64
    Enthusiast

    Join Date
    Apr 2002
    Location
    mechanicsville, md
    Posts
    274

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    sports bar pad for gen 1 mine is starting to break from traking it off to put the hard top on all the time

  5. #65
    Viper Owner
    Join Date
    Jun 2005
    Posts
    79

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    i can get w/s for all year vipers !!!!!

  6. #66
    Enthusiast

    Join Date
    Jul 2003
    Location
    danville, pa
    Age
    46
    Posts
    926

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    any word on how this program is going at all?

  7. #67
    Viper Owner
    Join Date
    Apr 2005
    Location
    Chicago IL
    Age
    42
    Posts
    147

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    1996 White Rims I need a new set. These are getting stained. Local Dodge Dealer says none available

  8. #68
    Enthusiast

    Join Date
    Jul 2001
    Location
    Plaistow, NH USA
    Posts
    2,020

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    I'm not sure Dodge is in a position to answer our questions at this time.

    If what Jon say is correct, then more power to the vendors. Some early parts are unique and possibly can not be replaced, but can be substituted / or the car can be "modified".

    I was promised that these things would be brought to the attention of DCX. I was also assured that they had the best of intentions.

    No other interactions have taken place. I am told that Dodge reads these threads.

    I am not as enchanted at I used to be, so that might make me dis-enchanted.

    What's a post Hog ?

  9. #69
    Viper Owner
    Join Date
    Aug 2007
    Location
    Alberta Canada
    Posts
    700

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    support arms for my 1994 Rt/10 soft top.seems they only come with the top which is not so soft in price.Also Bra for the same year of viper.

  10. #70
    Viper Owner
    Join Date
    Jun 2005
    Posts
    205

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    Alternator needed here!!!

  11. #71
    Viper Owner
    Join Date
    Apr 2007
    Location
    Metro Phoenix
    Posts
    679

    Cool Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    I have an ash tray from my 94 and a front mask "bra" in excellent condition.....

  12. #72

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    1996 RT10 hood stripe decal needed, No longer available at dodge.
    part #QH38 SA1 in silver.
    has anyone got one please

  13. #73
    Viper Owner
    Join Date
    Sep 2007
    Location
    FL
    Posts
    9

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    This is great stuff to help keep our VIPS" in great shape!!!
    BIG JOHN
    "MEZMERZ"

  14. #74
    Enthusiast

    Join Date
    Apr 2005
    Location
    Daytona Beach, FL (Port Orange)
    Posts
    15,320

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    Quote Originally Posted by bigpond View Post
    1996 RT10 hood stripe decal needed, No longer available at dodge.
    part #QH38 SA1 in silver.
    has anyone got one please
    Have u tried Jon B at PartsRack.com? Seems as though he had a set a couple months ago.

  15. #75
    Viper Owner
    Join Date
    Sep 2004
    Location
    Pittsburgh, PA
    Posts
    795

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    Door jam weather strip for 1992-1995 RT/10's can be added to the list. I recently bought from Chuck Tator the last drivers side and one of the last few passenger side weather strips shown in Chrysler inventory. I don't know if more could be found doing a dealer search or if they will eventually make more.

  16. #76

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    Chad
    thanks. I have tried Jonb but he had sold out.
    Chuck Tator also tried the parts locator for me, but it appears they have all gone now. I will most likely get a vinyl guy to make up a custom silver stripe.

  17. #77
    Viper Owner
    Join Date
    Apr 2007
    Location
    Metro Phoenix
    Posts
    679

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    This isn't just for the Gen1 and 2 but now that my 94 has been totaled, I have a full floor of the 12"yellow and black "Motor Mat" that I will sell cheap to someone with a yellow or bumble bee or even black car. Approx. 12 X 22 (1ft sq tiles) in good condition with a couple of boxes of extra tiles (brand new). I'll sell them for a song as my new car is White with blue stripes, and I don't want to throw the tiles away! PM me if your interested!!!

  18. #78
    Viper Owner
    Join Date
    Oct 2007
    Location
    San Antonio, Tx
    Posts
    1

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    looking for hard top for gen 1... autoform wants 5,000 shipped..

  19. #79
    Venomiss
    Guest

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    Quote Originally Posted by Kenneth Krieger View Post
    This isn't just for the Gen1 and 2 but now that my 94 has been totaled, I have a full floor of the 12"yellow and black "Motor Mat" that I will sell cheap to someone with a yellow or bumble bee or even black car. Approx. 12 X 22 (1ft sq tiles) in good condition with a couple of boxes of extra tiles (brand new). I'll sell them for a song as my new car is White with blue stripes, and I don't want to throw the tiles away! PM me if your interested!!!
    PM sent to you a few days ago.

  20. #80
    Enthusiast

    Join Date
    Jul 2001
    Location
    Plaistow, NH USA
    Posts
    2,020

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    Quote Originally Posted by Venomm View Post
    looking for hard top for gen 1... autoform wants 5,000 shipped..
    There are other options for hardtops. Vipermania, Mopar (used), etc. The autoform is unique where it requires autoform windows as well. It's a nice setup and pricey...but it is a quality product.

    Check the VCA Classified, Partsrack, E-Bay for used. Even if you need to paint it... paint is pretty cheap.

    Prices of Used Gen I's are lower now, but upkeep is not.

  21. #81
    Viper Owner
    Join Date
    Oct 2007
    Location
    FINALLY HOME AND PROUD TO BE AN AMERICAN !!!
    Posts
    128

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    I was told that the key fob for the 02 RT10 (keyless entry) with the Viper impression on it is obsolete>> Any confirmation ?? i could use 2 more!!

  22. #82
    Enthusiast

    Join Date
    Nov 2004
    Location
    Long Island
    Posts
    5,996

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    I need a weird part. On top of a Gen 2 front headlight assembly is a little piece of drainage tubing, that is a press fit into the black housing to vent the headlight. Beige, about 3 inches long.
    Lost one, and Chuck says it can NOT be ordered separate from the headlight assembly ($800.00), it has no part number.
    Who's got one for me?????????

  23. #83
    Enthusiast

    Join Date
    Nov 2004
    Location
    Long Island
    Posts
    5,996

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    See pic for above post.

  24. #84
    Viper Owner
    Join Date
    Sep 2007
    Location
    FL
    Posts
    9

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    Rear GLASS GASKET...99" R/T 10...

  25. #85
    Viper Owner
    Join Date
    Oct 2000
    Location
    Paso Robles CA
    Posts
    1,018

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    Quote Originally Posted by ViperJon View Post
    I need a weird part. On top of a Gen 2 front headlight assembly is a little piece of drainage tubing, that is a press fit into the black housing to vent the headlight. Beige, about 3 inches long.
    Lost one, and Chuck says it can NOT be ordered separate from the headlight assembly ($800.00), it has no part number.
    Who's got one for me?????????
    I have 1 for you if you want.

    luc.00GTS

  26. #86
    Viper Owner
    Join Date
    Mar 2004
    Age
    41
    Posts
    107

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    96 GTS - plastic surround for drivers side interior door handle.

  27. #87
    Viper Owner
    Join Date
    Jul 2005
    Location
    Ontario, Canada
    Posts
    96

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    Looking for the blower motor intake assembly (the part that sits on top of the blower motor and mates to the hood) for a 94 RT/10. Used is fine if anyone has one in good condition!

    Jay

  28. #88
    Enthusiast

    Join Date
    Jul 2003
    Location
    danville, pa
    Age
    46
    Posts
    926

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    you just missed one on ebay last week.

  29. #89
    Enthusiast

    Join Date
    Jun 2006
    Location
    Westminster, MD
    Age
    34
    Posts
    9

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    97, GTS: I am looking for the piece that connects the driverís side window to the motor in side the door. (I am using plastic tie raps now)

  30. #90
    VCA Associate Member
    Join Date
    Mar 2004
    Posts
    6,859

    Default Re: Sourcing Obsolete Parts For Gen I and Gen II Vipers

    Any news on getting the Old Parts Project going yet?

Page 3 of 6 FirstFirst 1 2 3 4 5 ... LastLast

Similar Threads

  1. The Horror...We Have Volkswagen Parts on our Vipers!!!
    By 00prowler in forum RT/10 and GTS Discussions
    Replies: 39
    Last Post: 02-26-2013, 05:15 PM
  2. Shared parts between Vipers and other brands.
    By AviP in forum RT/10 and GTS Discussions
    Replies: 96
    Last Post: 10-26-2011, 09:51 AM
  3. 5 pt harness obsolete?
    By Boxer12 in forum Performance Modifications
    Replies: 14
    Last Post: 04-23-2006, 04:47 PM
  4. Obsolete Already
    By C O D Y in forum RT/10 and GTS Discussions
    Replies: 0
    Last Post: 08-23-2001, 01:26 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts