Viper ACR Lover 02
Enthusiast
- Joined
- Mar 6, 2008
- Posts
- 96
- Reaction score
- 0
I was headed for a set of twisty-turns today in my 02 ACR and I hit the switch to put the driver-side window halfway down and it went all the way down into the door. When I went to push the switch for the window to raise back up, nothing happened. Right window and switch are fine. My question - obviously the switch is broken because it is floating a little bit - to replace the switch, is it one whole unit and both sides must be replaced or are the switches for the left and right windows separate?
Also, I borrowed a 2000 Viper service manual from a friend and the diagram says that you have to remove the plastic panel surround (the piece around the shifter, A/C, radio) + the transmission tunnel covering to get at the switches to replace them - is this the actual process and how long/difficult is it? I don't realy feel like breaking anything. Any help is greately appreciated.
John
Also, I borrowed a 2000 Viper service manual from a friend and the diagram says that you have to remove the plastic panel surround (the piece around the shifter, A/C, radio) + the transmission tunnel covering to get at the switches to replace them - is this the actual process and how long/difficult is it? I don't realy feel like breaking anything. Any help is greately appreciated.
John