Help with Torque Spec

[FlyBy]

First - thanks to dave6666 for his thermostat "how to". It worked great so far but...

I need the torque spec for the intake manifold. I have a manual on order but was hoping to get it done sooner. An old thread (94 R/T) had the spec at 10 in lb, followed by 200 in lb, starting at the center and working out in a circular pattern.

Is this spec also good for the Gen II (2000)?

 

[XLR8]

The final torque should be 100 inch pounds. 200 will pull the threads.

 

[dave6666]

Yeah, WHOA TONTO!!!

10 in lbs followed by 95 in lbs.

You must be registered for see images

 

[FlyBy]

Great! Thanks for the info - and pic!