Viper burnouts

[RTTTTed]

I took the Viper out for a little fun today. Been getting bored out of my mind driving my 440 Duster and new Hemi. so here's a couple hundred feet of rubber down.

You must be registered for see images

Here's the rubber shortened for viewing by zooming in a bit. Shor shift from first into second and lift about 85mph.

You must be registered for see images

Highway 20

You must be registered for see images

Pretty warm again today. Glad that it's under 90s now. Wind has changed so the smoke from the most recent forest fires aren't messing up the air.

Here's theRoe sc'd 600rwhp GTS before we hit the Semi.

You must be registered for see images

Here's a 72 440 Charger I won Red Rooster Invitational with many years ago. I had that car down to 3200# once I stripped it, got my pizza buddy to vurve my tinted Lexan windows and made a fiberglass bumper for it.

You must be registered for see images

You must be registered for see images

You guys can post your burnout pics.

No allowed very many pics in my profile so where do I donwload them for public view now?

Ted

 

[RobZilla]

 

[dave6666]

And I'm a tire salesman...

 

[Canyon707]

should be a video

 

[SkyBob]

Is it just me or is the burnout cloud identical in those two photos?

Bob

 

[dave6666]

Adobe Photoburnout

 

[Craig]

Is it just me or is the burnout cloud identical in those two photos?

Bob

or maybe it could be the fact that he posted the same picture twice

 

[RichieSRT10]

You must be registered for see images

Courtesy of JohnXD

 

[Hisserman]

If you're going to have a burnout site, you've got to have a least one of Frank Berle's efforts. Here he's just playing around at the Escanaba marina . . .

[media]http://www.youtube.com/watch?v=gRwYXi8Yc2s[/media]

 

[RTTTTed]

OK, fine. I had planned on pics. But, Duster (for the newer guys mostly)

[media]http://www.youtube.com/watch?v=RZZ5bo5RY2U[/media]

and here's one similar to above

[media]http://www.youtube.com/watch?v=5WgB6vNwLvA&NR=1[/media]

 

[FATHERFORD]

My viper wheel hops like crazy when burning out :-(

 

[RTTTTed]

While you're sideways?

You're right, my patch pics were at part throttle to minimize the wheelhop. Viper burnouts are expensive and that's why there's so few pics, another is because of the wheelhop.

[media]http://www.youtube.com/watch?v=4-8qg-L7Wak[/media]

You can see the wheelhop, hear the throttle lift and when the throttle goes down at the top of second gear you can see the vibration of the wheelhop even at 85mph.

That was a terrible vid. Here's old one that my daughter did

[media]http://www.youtube.com/watch?v=7Ioq41bZFxc&NR=1[/media]

 

[FATHERFORD]

While you're sideways?

You're right, my patch pics were at part throttle to minimize the wheelhop. Viper burnouts are expensive and that's why there's so few pics, another is because of the wheelhop.

[media]http://www.youtube.com/watch?v=4-8qg-L7Wak[/media]

You can see the wheelhop, hear the throttle lift and when the throttle goes down at the top of second gear you can see the vibration of the wheelhop even at 85mph.

That was a terrible vid. Here's old one that my daughter did

[media]http://www.youtube.com/watch?v=7Ioq41bZFxc&NR=1[/media]

Mine just wheel hops stupid. I took my viper to the track and I was wheel hopping, spinning, pedeling and short shifting the car to try and get it to stop all the way through the top of 3rd. I bought some slicks(CCW drag pack), and hopefully have time to call jon B today to order some half shafts.

 

[RTTTTed]

Try to find some poly susp bushings. Sean Roe did some research for energy suspensions (?). I read the thread, but I haven't read any resolution.

Perhaps JonB knows of some bushings if Sean doesn't.

Ted