350 cfm Gen3 Heads...courtesy GG

[dipapa]

Thought it be neat to post these Greg Good Gen3 Race Ported Heads and extend my thanks to Greg for the craftsmanship & effort that went into these heads. A labor of love indeed.

Greg tested these heads on 4 flow benches in Houston making from 335-345 cfm @ 0.650". Cam valve lift is 0.610" if i recall.

Thanks Todd (owner of A&C Performance) for getting the heads & cam into a damn good engine and tune.

Both you guys ROCK!!!

[media]http://i1187.photobucket.com/albums/z387/dipapa/Viper%20Copperhead/Dimitri_025.jpg[/media]

[media]http://i1187.photobucket.com/albums/z387/dipapa/Viper%20Copperhead/Dimitri_023.jpg[/media]

[media]http://i1187.photobucket.com/albums/z387/dipapa/Viper%20Copperhead/Dimitri_021.jpg[/media]

[media]http://i1187.photobucket.com/albums/z387/dipapa/Viper%20Copperhead/Dimitri_018.jpg[/media]

[media]http://i1187.photobucket.com/albums/z387/dipapa/Viper%20Copperhead/Dimitri_017.jpg[/media]

[media]http://i1187.photobucket.com/albums/z387/dipapa/Viper%20Copperhead/Dimitri_016.jpg[/media]

[media]http://i1187.photobucket.com/albums/z387/dipapa/Viper%20Copperhead/Dimitri_015.jpg[/media]

[media]http://i1187.photobucket.com/albums/z387/dipapa/Viper%20Copperhead/Dimitri_012.jpg[/media]

[media]http://i1187.photobucket.com/albums/z387/dipapa/Viper%20Copperhead/Dimitri_010.jpg[/media]

[media]http://i1187.photobucket.com/albums/z387/dipapa/Viper%20Copperhead/Dimitri_009.jpg[/media]

[media]http://i1187.photobucket.com/albums/z387/dipapa/Viper%20Copperhead/Dimitri_027.jpg[/media]

[media]http://i1187.photobucket.com/albums/z387/dipapa/Viper%20Copperhead/catchcan.jpg[/media]

 

[plumcrazy]

that caveman knows his stuff !

 

[Zentenk]

Oh I want some so bad!!!!!!!

 

[JAY]

Niiiiiiice Heads ! Great work ! Thanx for sharing .

 

[Ripper]

Outstanding Work !!

 

[eucharistos]

thems are purdy

congrats

 

[Doug Supercharged Vipers]

Very clean work and impressive flow numbers!

 

[Jerome Sparich]

Nothing like a good head job..........

 

[V10TT]

Greg is DA MAN!!

 

[vpower01]

Wow nice!

What catch can is that? And does it have an oil separator?

 

[X-Metal]

greg is THE MAN......those are works of art
.btw that is an awesome throttle body on there!

 

[Tiago]

Greg's work is the best.

 

[Greg Good Cylinder Heads]

Thanks for all the kind words.

It's really appreciated.

 

[ViperTony]

Heck, since we're talking about Greg Good Heads, here's some more GG Head ****:

GenII Heads: 315-327 c.f.m (GG flowed my heads on a few flow benches):

[media]http://gallery.viperclub.org/data/500/medium/ViperTony_007.jpg[/media]
[media]http://gallery.viperclub.org/data/500/medium/ViperTony_006.jpg[/media]
[media]http://gallery.viperclub.org/data/500/medium/ViperTony_005.jpg[/media]
[media]http://gallery.viperclub.org/data/500/medium/ViperTony_004.jpg[/media]
[media]http://gallery.viperclub.org/data/500/medium/ViperTony_003.jpg[/media]
[media]http://gallery.viperclub.org/data/500/medium/ViperTony_002.jpg[/media]
[media]http://gallery.viperclub.org/data/500/medium/ViperTony_001.jpg[/media]

 

[FLATOUT]

Man Greg I have got to swing by your shop soon. I remember all the way back in 1997 guys were telling me the guy to port heads in Houston was some guy named Greg Good

Andy