Thread: 1994 rt 10 ..wont start after i just turned it off :(

Reply to Thread
Results 1 to 16 of 16
  1. #1
    Viper Owner
    Join Date
    Feb 2011
    Location
    long island, ny
    Age
    32
    Posts
    51

    Default 1994 rt 10 ..wont start after i just turned it off :(

    Hey guys can someone help me i took it out for a lil bit..i turned it off now it wont start back up...any advice?

  2. #2
    Viper Owner
    Join Date
    Jun 2011
    Location
    Plymouth MA
    Posts
    57

    Default

    What are the symptoms? Completely dead. Start for a second with security lights blinking?

  3. #3
    Viper Owner
    Join Date
    Feb 2011
    Location
    long island, ny
    Age
    32
    Posts
    51

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    No security everything works..lights radio ..i just finished driveing it now wont turn back on..i turn the key and nothing happens

  4. #4
    Enthusiast

    Join Date
    Jun 2001
    Location
    Enterprise, AL USA
    Posts
    10,315

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    Clutch safety switch. Common for it to wear and make it difficult to start. Push the clutch in HARD and slightly to the right or left.
    Last edited by 99 R/T 10; 09-01-2012 at 04:34 PM.

  5. #5
    Viper Owner
    Join Date
    Feb 2011
    Location
    long island, ny
    Age
    32
    Posts
    51

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    Just tried that maybe i dont have the magical touch..imma keep trying that

  6. #6
    Viper Owner
    Join Date
    Sep 2004
    Location
    Connecticut USA
    Posts
    879

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    Try pulling the floor mat back a little. Sometimes that interferes with the switch

  7. #7
    Viper Owner
    Join Date
    Feb 2011
    Location
    long island, ny
    Age
    32
    Posts
    51

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    Nothings working

  8. #8
    Enthusiast

    Join Date
    Oct 2000
    Location
    Hampstead,NC.
    Age
    48
    Posts
    808

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    Sent you a P M

  9. #9
    Viper Owner
    Join Date
    May 2012
    Location
    Moscow. Pa.
    Posts
    104

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    Really MASH the clutch pedal. My 96 has done this before. If the clutch pedal has L/R movement the lexen bushings need to be replaced. A very cheap fix, but a pain to do for the first time.

  10. #10
    Viper Owner
    Join Date
    May 2012
    Location
    Moscow. Pa.
    Posts
    104

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    PM sent.
    Mark

  11. #11
    Viper Owner
    Join Date
    Mar 2011
    Location
    Green, OH
    Posts
    2,458

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    All good advice so far but if Tom sent you a pm, then he'll get it figured... he's the man!

    If you do try it though, mash it to the floor and keep the pressure on it while moving your knee left-to-right. That will give it a different angle of trajectory allowing a different movement... push from the left - push from the right.
    I can't believe those bushings went that much that fast. Should be some gradual warning I'd think.
    Maybe it's something else like the in the switch.
    Mike

  12. #12
    Enthusiast

    Join Date
    Jun 2001
    Location
    Enterprise, AL USA
    Posts
    10,315

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    Did you get it fixed? If so, what was the problem?

  13. #13
    Viper Owner
    Join Date
    Feb 2011
    Location
    long island, ny
    Age
    32
    Posts
    51

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    Didn't get fixed yet ..I had no time to work on it and try to bypass the switch

  14. #14
    Enthusiast

    Join Date
    Jun 2001
    Location
    Enterprise, AL USA
    Posts
    10,315

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    It should be one of three things, the ignition switch, clutch safety switch or the solenoid/starter. Try to turn the key with a volt meter on the clutch safety switch. If it shows power when the key is placed to start, ignition switch is eliminated. Then put the volt meter on the solenoid/starter and see if there is any power with the key turned to the start position. Go from there. Curious to see if it might be the ignition switch.

  15. #15
    Viper Owner
    Join Date
    Feb 2011
    Location
    long island, ny
    Age
    32
    Posts
    51

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    I'll post when I figure it out..I'm going to have time wednesday to take a look at it

  16. #16
    Viper Owner
    Join Date
    Feb 2011
    Location
    long island, ny
    Age
    32
    Posts
    51

    Default Re: 1994 rt 10 ..wont start after i just turned it off :(

    hey guys ended up being the starter cars back up and running again

Similar Threads

  1. HELP Car wont start!
    By Gottaviper in forum RT/10 and GTS Discussions
    Replies: 13
    Last Post: 05-28-2009, 10:29 AM
  2. Wont Start... Help!
    By Denney in forum RT/10 and GTS Discussions
    Replies: 11
    Last Post: 08-11-2007, 10:25 AM
  3. 94 wont start
    By FLOORIN04 in forum Engine, Drive Train, and Suspension
    Replies: 5
    Last Post: 01-22-2006, 06:38 PM
  4. my car wont start
    By vipersrt10 in forum SRT10 and SRT10 Coupe Discussions
    Replies: 17
    Last Post: 02-28-2005, 09:44 PM
  5. 1994 head gasgets gone mopar stufff turned up today
    By VIPER BAZ UK in forum RT/10 and GTS Discussions
    Replies: 0
    Last Post: 10-31-2003, 02:43 PM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts