Tuning By Sean Roe...

[Prof]

In about a month I plan to have Sean Roe in northern Illinois to tune my truck.

Two other people have have indicated an interest in using his skill while he is here.

I would like to see how much interest there is here in the Mid-west...we would probably schedule for a Saturday day on a dyno near my home in Wadsworth, IL.

Fees will vary with vehicle types and the number of people who want Sean's services while he is visiting. This might be a good excuse for a GTG too!

Please contact me via E-mail if you are interested...

royfouts@comcast.net

[Red Snake]

Welcome to the board Roy. I hope you will stick around.

For everyone else here, I know Roy from the Ram SRT-10 board and he is 1st class.


Good luck setting this up. I'll bet others will be interested and I know it will turn out great.

Tim

[Prof]

Thanks for the welcome!

Would love for some of you here to be able to take advantage of Sean visiting for a few days.

If you have the Roe Supercharger and/or the VEC II or III...he is the man!

[Prof]

Tentative Reservations:

1. Prof (Roe Twin Screw w/Vec III)
2. Hilgee (Twin Turbo w/Vec III)
3. Mike (Viper w/huge Roe SC build Vec III)
4. DevilDawg3097 (Stock pre-build Dyno Run)
5. Begood (dyno pull only)
6. MikeNice (dyno pull only)
7. Matt (Minn. Viper tune)
8.
__________________

[Prof]

Any others interested?

[Madduc]

Prof, sent an email...

[Prof]

1. Prof (Roe Twin Screw w/Vec III)
2. Hilgee (Twin Turbo w/Vec III)
3. Mike (Viper w/huge Roe SC build Vec III)
4. DevilDawg3097 (Stock pre-build Dyno Run)
5. Begood (dyno pull only)
6. MikeNice (dyno pull only)
7. Matt (Minn. Viper tune)
8. Mike (IL Paxton tune?)
9. Madduc (MI, Viper w/Roe SC)

[Prof]

Just a couple of more days and we will start the arrangements...any last minute additions?

[Kevan]

Am I not on either list (here or The C) for a reason?

[Madduc]

Any news??

[Prof]

1. Prof (Roe Twin Screw w/Vec III)
2. Hilgee (Twin Turbo w/Vec III)
3. Mike (Viper w/huge Roe SC build Vec III)
4. DevilDawg3097 (Stock pre-build Dyno Run)
5. Begood (dyno pull only)
6. MikeNice (dyno pull only)
7. Matt (Minn. Viper tune)
8. Mike (IL Paxton tune?)
9. Madduc (MI, Viper w/Roe SC)
10. Kevan (OH, Tune or just Dyno?)

We have a chassis dyno...will be working with Sean on Monday to try to clear the first weekend in Oct.

More on Monday.

Roy

[Prof]

OK here is the new list:

1. Prof (Roe Twin Screw w/Vec III)
2. Hilgee (Twin Turbo w/Vec III)
3. DevilDawg3097 (Stock pre-build Dyno Run)
4. Begood (dyno pull only)
5. MikeNice (dyno pull only)
6. Matt (Minn. Viper tune)
7. Mike (IL Paxton tune?)
8. Madduc (MI, Viper w/Roe SC)
9. Kevan (OH, Tune or just Dyno?)

We have the facility reserved...

Sean has his tickets...

Now we need to put our money where our mouth is...please.

Details:

VEC Tunes will be $375 dollars which includes dyno time with tie down services provided.

Dyno pulls with full service will be $150 (an hour of dyno time, probably three pulls maybe four depending on temperature).

Location: Westech Automotive, 418 S. Cogswell, Silver Lake, WI 53170

Sean will be able to tune the afternoon of Oct. 3, and all day on Oct. 4.

It will be necessary to contact me with your preferred date and time. Please use my email address: royfouts@comcast.net

We have room for more tunes...if we can get four or five more the cost per tune will decrease...

I am fronting all the funds, so I would appreciate it if we could get firm commitments by the end of this weekend. When you contact me, give me your name, email address, phone and what time you want to make an appointment...first come first served! I will want a Paypal payment or check in my hand to block out your slot.

Spread the word please...if this goes well maybe we can make it an annual GTG!

I will make nothing, anything from additional tunes will serve to discount the cost of each tune.

[Prof]

Bump...Need a little input here please...

[Madduc]

Sent you a PM.

[Prof]

The list is shrinking, at this point my tune will cost about $1500...anyone want to jump in? Have lost three that planned to make it...As the list shrinks my investment gets bigger and bigger, guess that is the way the world turns.

1. Prof (Roe Twin Screw w/Vec III)
2. DevilDawg3097 (Stock pre-build Dyno Run)
3. Begood (dyno pull only)
4. MikeNice (dyno pull only)
6. Matt (Minn. Viper tune)
7. Madduc (MI, Viper w/Roe SC) (Paid thank you.)
8. Kevan (OH, Tune or just Dyno?)

We have the facility reserved...

Sean has his tickets...

Now we need to put our money where our mouth is...please.

Details:

VEC Tunes will be $375 dollars which includes dyno time with tie down services provided.

Dyno pulls with full service will be $150 (an hour of dyno time, probably three pulls maybe four depending on temperature).

Location: Westech Automotive, 418 S. Cogswell, Silver Lake, WI 53170

Sean will be able to tune the afternoon of Oct. 3, and all day on Oct. 4.

It will be necessary to contact me with your preferred date and time. Please use my email address: royfouts@comcast.net

We have room for more tunes...if we can get four or five more the cost per tune will decrease...

I am fronting all the funds, so I would appreciate it if we could get firm commitments by the end of this weekend. When you contact me, give me your name, email address, phone and what time you want to make an appointment...first come first served! I will want a Paypal payment or check in my hand to block out your slot.

Spread the word please...if this goes well maybe we can make it an annual GTG!


Prof